Content3 Content4

The display DIGEDI-30 is a useful accessory to make the everyday use of the DIGENIUS TVBox much easier.

To use this device, only a few simple changes to the receiver are neccessary. This is easy as only 4 wires have to be soldered to the receivers PCB, in some cases the house has to be modified slightly.
After Power-On, the DIGEDI-30 displays the selected channel without any delay. When the receiver is switched off (Power-Off or Stand-by), the display is also powered down. The colour of the display can be selected between red, green and yellow. Please note your preferred colour when ordering.
One of the main advantages of this device is the fact, that it is not neccessary to switch the TV on to see which channel is selected in Radio-Mode. The four digit display is large enough to be visible also from greater distances. Also, the operating mode (TV / Radio / AV) is displayed. If the receiver is switched into radio-mode, 0 0 is displayed for a few seconds, if switched to TV-mode, [ ] is displayed. A small dot is active if the receiver is in standby-mode.

Technical data:

· PCB-Size: Controller : 79 mm * 83 mm, Display : 29 mm * 60 mm
· Display : 4 digits
· 7-segment-LED, height 13,5 mm
· Displaycolours : rot, grün oder gelb möglich (Please note your prefferred colour at "Text" !)
· Displaymodes : Radio / TV / AV
· Connecting : wires should not be longer than 1 m
· On / Off : automatic, controlled from receiver
· No manual operation required !

	Unit Price:	incl. VAT plus shipping costs
	Text:
	Quantity:

Last viewed items

Item Price      DIGEDI-30, F E Display for DIGENIUS TVBox, ready made unit 40.14 EUR   incl. VAT plus shipping costs    Audio RCA 0.5 Audio-Cable, Stereo, shielded, 0.5 meters 0.99 EUR   incl. VAT plus shipping costs    Audio RCA 1.5 Audio-Cable, Stereo, shielded, 1.5 meters 0.99 EUR   incl. VAT plus shipping costs